0

Sewer-Line-Problems-RepairsProblems with drains in the home or sudden stains appearing on and around the foundation can all be signs of potential sewer line repairs in the offing. These can quickly turn into an expensive undertaking and unless something is done as soon as possible, it has the potential for seriously undermining the ability of the home to function. Whether there is an existing septic system or whether the home is hooked up to the municipal sewer system, reporting signs of trouble to professional plumbers can avert a major home repair disaster in the future.

What Causes Sewer Line Damage?

Most sewer line repairs will have their root cause in blockage of the lines themselves. The first instinct of homeowners when they come across a slow moving drain is to pour a lot of harsh chemicals into the lines to open up or remove the clog. While that might be a temporary fix, at the same time they could be causing more damage with the chemicals themselves. In older homes especially, older pipes made of clay or porous materials can be eaten away by the chemicals within drain cleaners and cause the pipes to break down.

Tree roots are attracted to sources of water and when trees are planted too close to a home’s foundation, they can find their way into the sewer pipes. The roots grow into the pipes and ball up, completely blocking the pipe. In these cases, the pipes will have to be removed and replaced. At other times, the cause of sewer line problems may be that the ground itself has shifted around the pipes and have bent them at an angle that does not promote drainage and the water begins to collect within the pipes and potentially leak out into the foundation.

What to Do When You Notice Signs of Problems

The first thing that any homeowner should do when problems with drains or seepage occurs is to not run immediately for the drain cleaner but instead call on the professionals to come out and inspect the pipes for cleaning and repair. A plumber can quickly determine where the problem is and take measures to get it repaired, usually within the same day. When they are installed in a home, sewer pipes usually have clean out plugs that can be immediately checked for clogs, without having to dig up the ground around a home.

Alternatively, if it is determined that pipes will have to be replaced due to a faulty septic system, it may entail more digging and reconstruction that could have been prevented if it had been better maintained in the past.

Types of Repairs

For minor repairs to pipes, as is the case for a pipe that has cracked due to shifting or pressure, a plumber can make the repair quickly by simply recoating the interior of the pipe with epoxy, as long as the crack is not beyond repair. Replacement of short lengths of pipes can be done efficiently by expert plumbers and should not take more than a day to complete. For simple clogs and blockage, power rodders could be used to remove the foreign material blocking the pipe.

When it comes to sewer line repairs involving septic tanks, it may be a more intensive repair situation than normal. Most septic tanks are buried in backyards, so the yard may have to be dug up from the point where the pipe enters the home, to where it connects with the septic tank.

On the brighter side, having it all in one place will make it easier to perform the repairs, in spite of all the mess made by the digging. This may take a few days but it will be worth it in the long run, especially if you arrange to have regular maintenance done on it in the future, on a regular basis to prevent more problems.

Sewer Camera Inspection

Do you know the newest way to pinpoint sewer line problems? If you are like the traditional homeowner, you probably do not. Ask your neighbors or read articles that are in the Internet and you will realize how many households are getting helped out with their problems by hiring plumbers or experts that use sewer camera inspection technologies.

If your home or business establishment is experiencing problems caused by sewage backups and slow drains, sewer camera inspection can really help you locate the problem and start the repair. All you need to do is to contact professionals that readily use this process. Given the latest sewer repair technologies, they can easily and efficiently locate your sewer problems. Nowadays, many households hate the traditional ways in repairing damages in that they bring lots of inconveniences. Not only do traditional plumbers need to dig up your yard or driveways that can cause further damage to your home and landscapes; they also repair or replace your sewer lines in a way that is still prone of future leaks.

Compared to the traditional sewer line diagnostics and repair, which most treasure-finding process has to be done manually and destructively, sewer camera inspection finds out all the problems that your lines have such as cracks caused by tree roots, faulty installations, or total chaos on your sewer system. The sewer camera inspection can be done using a flexible wire with a tiny, water-proof camera at the end. Using this state-of-the-art technology, the sewer expert can pinpoint any damage on your sewer lines. They will just insert the sewer camera on either ends of the pipes. You see, there is point to ruin your ground or landscapes because not all of your sewer lines need to be dug up. Not only does sewer camera inspection produce little annoyance to your household, it also speeds the entire repair job.

Once the problem is located using sewer camera inspection, the damaged pipes can be replaced using a trench-less pipe replacement. This type of repair is the least invasive and most cost effective way to replace your damaged and broken pipes. This method uses pipe bursting, the old, original sewer lines are used as a guide and a new pipe that is pulled through the existing line using a high strength cable splitting the existing pipe apart replacing it with a new seamless polyethylene pipe, giving you a new, more long-lasting sewers at the same location where the damaged lines where. This method does not require the entire property to be dug up does not destroy existing landscaping it only requires digging a small hole at each end of the piping to be replaced saving you money on landscape and driveway repairs.

Now that you know that newest technologies and methodologies in repair, you have given yourself a decisive decision what to do to avoid further sewer line problems to your home or business. Like any other problem, the sooner you assess it, the sooner you get it solved. So, find a sewer line professional that readily uses a sewer camera inspection as soon as possible-do not just stumble.

The last thing our house needs is a set of broken and damaged sewer pipes. Not only does it cause a lot to fix the problem, it also has the ability to burn a large hole in our wallets. Fixing it sounds very daunting, as there is the impression that the task is a very difficult one to accomplish. However, one needs to know that you do not need to have any advance skills and knowledge in plumbing in order to perform your very first sewer pipe repair.

1. You must first gain access to the broken sewer pipe. If it is found beneath a concrete floor, use a saw specifically designed to cut through the surface of concrete. Create a square pattern as you cute. After doing so, smash the area with a sledgehammer. The small bits of broken parts must then be removed using a prying bar. Use a shovel to remove any unwanted particles or dirt. This is the first step to sewer pipe repair.

2. Analyze the pipes and come to a conclusion as to what type of repair you must do in order to fix the problem. Take note of any tiny punctured holes and remedy them using repair clamps and gaskets. If there are any cracks too big to be unnoticed, then pipe removal is required.

3. The use of repair clamps can be considered. To use such tool, you must first remove any particles surrounding the sewage pipe. Put the clamp gasket on top of the puncture and open the clamp using its hinges. You must then slide the bolts of the clamps inside the opening of the bolt and use a wrench to tighten it shut. After doing the task, test the effects of your efforts by turning on the water and allowing it to flow through the pipes.

4. Sewer pipe repair can also involve the removal of cracks on the pipes. You can opt to cut this part of the pipe using a reciprocal saw or even a hacksaw if the former is too large to be utilized. After each cut, smooth the edges using a file, a sandpaper, or any rough clothing.

5. To replace the pipe’s broken parts you will need to get a newly cut pipe from your hardware store. With a measuring tape, acquire the overall length of the pipe that you will need to replace.

6. Use a repair coupling tool over the pipes to fill the gap until they cover the two sides of the joint wherein the sewer pipes and the replacement one meet together.

7. Finally, you will need to tighten the clamp to complete your sewer pipe repair. Use a screwdriver onto the screws of the clamp and turn it in a clockwise motion to tighten it. Check the results of your efforts by turning on your faucet and running water inside the pipes. Be sure to check for any small leaks so you will know whether or not you are successful on your attempt.

Mister Plumber in Toronto, ON specializing sewer repair, drain cleaning, re-piping and emergency plumbing, Mister Plumber uses the latest technology to effectively troubleshoot and quickly repair any plumbing problem and offers a fast response and free estimates. Call us 416 939 1530 or fill the form for Online Free Estimate.

Leave us a comment

Request Estimate