0

Backwater valve installed by Mister PlumberBackwater valve is an important device in the pipe that avert sewage water from flowing back into the building. When the sewer in the street backs up downstream, there are chances that upstreams may flow back to your building. The experts of backwater valve installation Etobicoke industry suggested that people must shut down the main line as this hinder any dirty water to return to your toilet. The closing and opening of the gate or flap is controlled by floats that are below the gate that enable it to lift and close to control the back flow of the water.

Various professionals of back water valve Etobicoke industry suggests that backwater valve maintenance is necessary on regular bases to ensure that there are less chances of valve failure. There are various types of backwater valves and most common types are installed by cutting a hole in the base above the main sewer line inside the home.

Advantages Of Backwater Valves

Installation of valves can reduce the sewage related problems such as foul smell from blocked drain and prevent overland flooding. The flap or check valves are simple to use and prevents the back flow of the sewage water. Gate valves are more complex and require manual operation when the flood is occurring. They supply stronger seal than the flap valves. There are innumerable types of valves and differ by the complexity, ease of working and their seals.

Guidelines For Installation

Check your local codes and ordinances before installing valves in your home. One thing that should be kept in mind is to install these back water valves on the pipes lines that are lower than the potential flood level. Some valves come with advantages of gate and flap valves in a single design. It is advised to discuss the pros and cons of the valves that you are installing in your home with your professional. One should hire licensed plumbers and contractors, if you are making changes in your home plumbing.

Maintenance Tips For Valves

Remove the clean out plug from the top of the valves for visual inspection of the entire valves to detect chaff which is struck in the drain. Most of the stuff that are struck around the gate generally balk its free movement. Inspect the area above and around the gate carefully with the help of a flashlight. Cleaning the gate with fast jet of water and check the movement of the gate. Oil the screw in case of rusting and it is advisable to replace the O -ring rather than fixing it.

If you are still looking for trusted plumber, Mister Plumber in Toronto, Etobicoke, Scarborough, North York specializing sewer repair, upgrade waterline, water service upgrade, drain cleaning, backwater valve installation, lead pipe replacement, re-piping and emergency plumbing, Mister Plumber uses the latest technology to effectively troubleshoot and quickly repair any plumbing problem and offers a fast response and free estimates.

Leave us a comment

Request Estimate