Faucet

Faucet Repair or Replacement in Toronto? How to Decide

Faucet Repair vs. Replacement: What Toronto Homeowners Should Know

A dripping faucet is easy to ignore. It is only a few drops, after all. But drip by drip it adds up to thousands of litres of wasted water a year, a higher water bill, and in some cases a hidden leak under the sink that damages the cabinet.

When a faucet starts to leak, squeak or lose pressure, you face a simple question: is it worth repairing, or is it time to replace it? The honest answer is that either can be right. It depends on the type of faucet, its age and condition, how many times it has already been repaired, and what you want from it.

This guide explains how to tell the difference, what each option involves, and how to make a decision that saves you money and hassle. It is written for Toronto homeowners, from downtown semis to Etobicoke bungalows and Scarborough townhomes.

Leaky faucet repair – plumbing, drain services, water services

Why Faucets Fail

Faucets are simple machines, but they have moving parts that work every day. Inside the handle, water is controlled by a valve of some kind. Over time the parts that seal that valve wear out, and the finish and body deteriorate.

The most common causes of faucet problems are:

  • Worn washers, O-rings and seals. Rubber parts harden, crack or flatten. This is the most common reason for a drip.
  • A worn cartridge or ball valve. Single-handle faucets rely on a cartridge or ball that wears down with use.
  • Mineral buildup. Toronto’s municipal water is considered moderately hard, so scale can build up in aerators, cartridges and valve seats over the years. Scale restricts flow and prevents parts from sealing.
  • Corrosion. Moisture and age can corrode the faucet body, the valve seat and the connections underneath.
  • Loose or damaged connections. Supply lines, nuts and mounting hardware can loosen or fail.
  • Age and wear. Even a good faucet does not last forever.

Knowing what is failing is the first step in choosing between repair and replacement.

The Four Main Faucet Types (and Why It Matters)

How a faucet is built affects how easy and economical it is to repair.

Compression Faucets

These older faucets have separate hot and cold handles that you turn several times to open and close. Inside, a rubber washer presses against a valve seat. They are simple, and a worn washer or seat is usually inexpensive to fix. The trade-off is that they tend to be found in older homes and often come with other aging parts.

Ball Faucets

Single-handle faucets with a rounded cap use a ball valve with several seals and springs. They have more small parts that can wear, so leaks are common, though repair kits are widely available.

Cartridge Faucets

Single- or double-handle faucets that use a replaceable cartridge are very common in Toronto homes. When one leaks, replacing the cartridge often restores it, as long as the right cartridge is still available.

Ceramic Disc Faucets

These use two ceramic discs that slide against each other. They are durable and usually last a long time with little maintenance. When a ceramic disc faucet fails, it is often because of mineral buildup or a cracked disc in a cartridge.

Not sure which type you have? We can usually tell as soon as we see it and take the handle off.

Modern kitchen faucet installation

When Repair Makes Sense

Repair is often the best choice when the faucet itself is in good shape and only one part has worn out. Consider repair if:

  • The faucet is relatively new and still has a solid body and a good finish.
  • The problem is a single, known part, such as a worn washer, O-ring, cartridge or aerator.
  • Replacement parts are easy to find for your make and model.
  • There is no corrosion or pitting on the body, spout or handle.
  • You like the faucet and it suits your sink and your style.
  • It is a high-quality faucet from a reputable brand that is built to be repaired.
  • The repair is inexpensive compared with the cost of a new faucet.

Common faucet repairs include:

  • replacing a worn washer, seat, O-ring or cartridge;
  • cleaning or replacing the aerator to restore flow;
  • tightening or replacing loose handles and mounting hardware;
  • replacing supply lines or shut-off valves under the sink;
  • clearing mineral buildup from internal parts.

A good plumber can often complete a faucet repair in a single visit, and a repaired quality faucet can last many more years.

When Replacement Is the Better Choice

Sometimes repairing is like patching an old tire: it works for a while, but the problem returns. Replacement is usually the better choice when:

The Faucet Has Been Repaired Repeatedly

If you have fixed the same faucet more than once, or a new repair leads to another leak soon afterward, the faucet is telling you it has reached the end of its life. Each repair costs time and money, and the total can pass the price of a new faucet.

The Body Is Corroded, Pitted or Cracked

Corrosion, green or white crusty buildup, pitting and cracks in the body, spout or base are signs that the faucet is failing from the inside. These problems cannot be repaired properly, and a cracked body can leak suddenly.

The Finish Is Worn or Peeling

A damaged finish is not just cosmetic. Peeling or flaking plating can expose metal to moisture and speed up corrosion.

Parts Are Hard to Find

Older and discontinued models, and cheap faucets from unknown brands, often have no replacement parts available. If a plumber cannot find the right cartridge or valve, repair may not be possible.

The Faucet Is Old

There is no single rule, but a faucet that is 15 to 20 years old or more is often near the end of its life, especially in a busy kitchen. Even if you can repair one problem, others are likely to follow.

Water Flow Is Poor

If cleaning the aerator doesn’t fix weak flow, the cause may be scale or corrosion inside the faucet body or valves, which can’t easily be removed.

You Want an Upgrade

Replacing a faucet can improve how your kitchen or bathroom works and looks. Options include:

  • Pull-down or pull-out sprayers that make rinsing and filling pots easier.
  • Touchless or touch-activated faucets that reduce mess and are useful for busy kitchens.
  • Water-saving aerators and low-flow models that reduce water use without a noticeable change in performance.
  • A different style or finish to match a renovation.
  • A different height or reach to fit a deeper or larger sink.

Lead and Safety Concerns

Older faucets, especially those installed many years ago, may contain more lead than modern ones. Faucets sold in Canada today must meet lead-content standards, so look for the certification mark on the product. If you have an older faucet and are concerned about the quality of your drinking water, replacing it is one step worth considering, along with finding out whether your service line is lead. See our page on lead pipe replacement.

connection-to-the-laundry-faucet

A Simple Decision Guide

Use these questions as a starting point:

  1. How old is the faucet? Under about ten years, repair is often worth it. Over fifteen to twenty, replacement is usually smarter.
  2. What is leaking, and from where? A drip from the spout is usually a cartridge, washer or seat. A leak from the base or under the sink may be a seal, a supply line or a cracked body.
  3. Has it been repaired before? If so, replacement becomes more attractive.
  4. Is the body in good condition? Corrosion or cracks point to replacement.
  5. Can parts be found? If not, replacement is the only real option.
  6. What does the repair cost compared with a new faucet? If a repair costs more than about half the price of a good new faucet, put the money toward a new one.
  7. Do you want something different? If so, this is a good time to upgrade.

If you aren’t sure, a plumber can look at the faucet, explain what is wrong and give you honest numbers for both options.

What About the Cost?

We don’t believe in guessing prices over the internet. The cost of a faucet repair or replacement depends on several things:

  • the type and quality of the faucet and the parts needed;
  • whether the shut-off valves and supply lines are in good condition;
  • how easy the faucet is to reach;
  • whether the sink or countertop needs any modification;
  • whether other issues, such as a leak under the sink, are found.

When we see the faucet, we explain your options and give you a clear quote before any work starts. Request a free estimate to get started.

What a Professional Faucet Replacement Involves

Replacing a faucet looks easy, but the details matter. Here is what a typical visit includes:

  1. Choosing the right faucet. It must fit the number of holes in your sink or countertop, the space available and your plumbing.
  2. Shutting off the water at the local shut-off valves under the sink. If they are stuck, leaking or missing, we replace them so the next repair is easier.
  3. Removing the old faucet, which is often corroded in place and hard to reach.
  4. Installing the new faucet with proper seals and connections.
  5. Replacing the supply lines where needed, because old lines can fail soon after a new faucet goes in.
  6. Testing for leaks, checking the flow and pressure, and cleaning up.

For a wider look at fixture work, see our page on toilet, shower, sink and bathtub installation.

Shower-faucet-installation-in-Toronto

Is DIY a Good Idea?

Replacing a washer or cleaning an aerator is within reach of many homeowners. Beyond that, DIY has risks:

  • Stuck shut-off valves. Older valves under sinks often don’t close fully, or leak when turned. Forcing them can turn a small job into a flood.
  • Corroded fittings. Old nuts and connections can seize or break.
  • Wrong parts. Buying the wrong cartridge or faucet wastes time and money.
  • Hidden leaks. Poorly tightened connections can leak slowly inside the cabinet, causing mould and rot that you don’t see until it is serious.

If you aren’t sure the shut-off valves work, don’t start the job. A plumber can make the repair safely and check the rest of the system while on site.

Don’t Ignore a Dripping Faucet

A small drip can mean more than wasted water:

  • Higher bills. A steady drip wastes thousands of litres over a year, and the cost shows up on your water bill. Read more about how a leaky faucet can raise your water bill.
  • Staining and wear. Constant dripping can stain sinks and tubs and speed up wear on the faucet.
  • Cabinet damage. A leak under the sink can soak the base of the cabinet, warp wood and feed mould.
  • A sign of bigger problems. A drip may be your first hint that the shut-off valves or supply lines need attention.

If you can’t find the source of a leak, we can help you diagnose it. See our guide to hidden water leak detection in Toronto.

Why Choose Mister Plumber for Faucet Repair and Replacement?

  • Licensed plumbers with experience since 2002 in Toronto.
  • Honest recommendations. We tell you whether repair is enough, and we don’t push replacement when it isn’t needed.
  • Clear quotes before work begins.
  • Careful, clean work in your home.
  • Help choosing a faucet that fits your sink, your plumbing and your budget.
  • A complete check, including shut-off valves and supply lines, so one repair doesn’t lead to the next.

We serve homeowners across Toronto, including Etobicoke, North York and Scarborough. You can see what our customers say on our reviews page.

Kitchen faucet replacement

Frequently Asked Questions

Is it cheaper to repair or replace a faucet?

A simple repair, such as replacing a washer or cartridge, is usually cheaper than a new faucet. But if the faucet is old, corroded or has been repaired before, repeated repairs can cost more over time than replacing it once.

How long does a faucet last?

Quality faucets often last fifteen to twenty years or more, but lifespan depends on the build, water conditions and how much the faucet is used. Cheaper faucets tend to wear out sooner.

Why is my faucet dripping?

The most common cause is a worn washer, O-ring, seal or cartridge. Mineral buildup and a damaged valve seat can also cause drips. A plumber can find the exact cause.

Can I replace a faucet myself?

Some homeowners do, but stuck shut-off valves, corroded fittings and incorrect connections cause many problems. If you aren’t confident, it is safer to have a licensed plumber do it.

Should I replace the shut-off valves and supply lines at the same time?

Often, yes. Old valves and lines can fail soon after a new faucet is installed, and replacing them during the same visit saves time and the risk of a second repair.

Not Sure Whether to Repair or Replace Your Faucet?

Let a licensed Toronto plumber take a look. Mister Plumber will inspect your faucet, tell you honestly what it needs and give you a clear quote for repair or replacement, so you can decide with confidence.

Call 416-939-1530 or request a free estimate online.

If water is flowing and you can’t stop it, call our 24/7 emergency plumbers in Toronto right away.

Share this content:
Close Welcome Bar