sump pumpIf you don’t have sump pumps, it means you are putting your Toronto home at risk of flooding. Basically, they are convenient tools that can clean the home basements effectively.

Today, every Toronto homeowner, even those without basements, are taking the benefits of sump pumps in keeping their houses safe from water damage. They are employed for emergency water removal collected in your basement because of heavy rain and any other reason. They are used for regular pumping of waste water from sewage system.

If you are facing the problem of basement leakage and want to install these pumps without paying much money, then you must read the below given information. It will explain you all about how to install a sump pump in easy steps.

Furthermore, you must have all the following given things and tools that support you to do the installation task effortlessly:

1. Complete tool kit
2. Safety gears including gloves for draining the system easily
3. Electric outlet
4. Flashlight PVC piping
5. Glue and tape

Sump Pumps Installation in Easy Steps:

First and foremost thing that is important in the installation process is, the fixing of the pump. Start installation work with the removal of old pump. The sump pump model extracts the water from the floor. For this purpose, it does not need a ditch. Just locate the area where the water normally collected in the basement and install the pump at that particular location. Make sure that the pump sits in the pit. Test the pipes outside to verify where the water is routed. Connect the waste water pipe to a connection draining to the yard. You can reuse the old pipes for this task, if they are in good condition, or use the new one as per the requirement. Also, integrate check valve to the discharge pipe, so that water flow can be controlled easily. Connect the main discharge line to outlet pipe, either by tightening a union, or the hose clamps. If the opening doesn’t have a pipe link, connect either 1 1/4″ or 1 1/2″ size PVC piping to the waste pipe opening and the other end of the sump pump. The size of the waste pipe will decide the size PVC you’ll need. Do not make use of minor piping since it will not be able to hold great volumes of water. If more than one pipe is wanted, glue and tape the joints, so it doesn’t crack during use.

Hook up it to the electricity and start the pump. If electricity is not available, arrange for the backup sump pump.

Generally, sump pumps are a common fixture in many homes for basement clearing. They are installed in every new constructed home. They help you to keep the basement area clean and dry. If any time they stop working for any reason, check immediately or change the pump, if needed.

If you are still looking for trusted plumber, Mister Plumber in Toronto, Etobicoke, Scarborough, North York specializing sewer repair, upgrade waterline, water service upgrade, drain cleaning, backwater valve installation, lead pipe replacement, re-piping and emergency plumbing, Mister Plumber uses the latest technology to effectively troubleshoot and quickly repair any plumbing problem and offers a fast response and free estimates.

Leave us a comment

Request Estimate