Professional Sewer Line Repair, Replacement and Installation in Mississauga
A damaged sewer line can cause recurring drain blockages, sewage backups, unpleasant odours, slow drainage and water damage. At Mister Plumber, we provide professional sewer line repair and replacement services for residential properties throughout Mississauga.
Our licensed and insured plumbers use sewer cameras, pipe locating equipment and professional drain equipment to identify the cause and location of sewer problems before recommending the appropriate repair.
Call 416-939-1530 to speak with a Mississauga plumber or request an estimate.
Sewer Line Repair in Mississauga
Sewer pipes can deteriorate for many different reasons. Older sewer lines may develop cracks, separated joints or corrosion, while tree roots can enter through pipe joints and gradually restrict the flow. A damaged or collapsed section may also cause repeated blockages that cannot be permanently resolved with drain cleaning alone.
Our sewer line repair service begins with an inspection whenever possible. A sewer camera allows us to see the inside of the pipe and determine the location and nature of the problem.
Depending on the condition of the sewer line, we may recommend:
– Repairing a damaged section of pipe
– Replacing a deteriorated sewer line
– Correcting an offset or separated joint
– Removing a collapsed section
– Addressing root intrusion
– Correcting a bellied or improperly sloped section
– Replacing severely deteriorated pipe
– Using a trenchless sewer replacement method when appropriate
Our goal is to recommend a repair based on the actual condition of the pipe rather than replacing more of the sewer line than necessary.
Sewer Camera Inspection Before Repair
A sewer camera inspection can provide important information about the condition of an underground sewer pipe without unnecessary excavation.
A camera is inserted into the sewer line through an appropriate access point. The plumber can inspect the interior of the pipe and identify problems such as:
– Tree root intrusion
– Cracks and fractures
– Offset or separated joints
– Collapsed pipe
– Heavy buildup
– Corrosion and deterioration
– Missing sections of pipe
– Bellied or sagging pipe
– Foreign objects or other obstructions
Locating equipment can also be used to determine the approximate underground location and depth of a damaged section. This information can help determine where excavation is required when a conventional repair is necessary.
Traditional Sewer Line Repair
Traditional sewer repair, sometimes called open-cut repair, involves excavating the ground above the damaged sewer pipe to expose the affected section.
Once the pipe is accessible, the damaged portion can be removed and replaced. The excavation is then backfilled.
Traditional excavation may be the most practical option when the damaged section is relatively shallow, when only a small section requires replacement, or when site conditions make trenchless methods unsuitable.
Before starting excavation, we assess the location and condition of the sewer line to determine the most appropriate repair method.
Trenchless Sewer Line Repair and Replacement
Trenchless sewer technology can sometimes allow a sewer line to be repaired or replaced with significantly less excavation than conventional methods.
The suitability of a trenchless method depends on factors such as the existing pipe material, pipe diameter, location, condition of the line, access points and the type of damage.
When conditions are suitable, trenchless repair or replacement can reduce disruption to landscaping, concrete surfaces, driveways and other areas above the sewer line.
Pipe Bursting
Pipe bursting is a trenchless method used to replace an existing underground sewer pipe.
Small access pits are created at appropriate locations. A bursting head is pulled through the existing sewer line, breaking the old pipe apart while simultaneously pulling a new replacement pipe into its place.
Pipe bursting can be an effective option when an existing sewer line needs complete replacement and the site conditions allow this method to be used.
The new pipe provides a continuous replacement line and can eliminate many of the problems associated with deteriorated joints in the old sewer.
Pipe Relining
Pipe relining, also known as cured-in-place pipe lining (CIPP), involves installing a resin-based liner inside an existing pipe. The liner is formed against the inside wall of the existing sewer and cured to create a new pipe within the old pipe.
Depending on the condition and configuration of the existing sewer, pipe relining may be suitable for certain types of cracks, leaking joints, root intrusion and other defects.
One of the main advantages of relining is that it can reduce the amount of excavation required. However, it is not appropriate for every sewer problem. A professional inspection is necessary to determine whether the existing pipe is a suitable candidate for relining.
Common Sewer Line Problems We Repair
Sewer line problems can develop gradually or occur suddenly. Common causes include:
Cracked or Broken Sewer Pipe
Ground movement, aging materials and external pressure can cause underground sewer pipes to crack or break. Cracks can allow soil and roots to enter the line and may eventually lead to a blockage or collapse.
Root Intrusion
Tree and shrub roots can enter sewer pipes through small cracks or joints. As roots grow inside the pipe, they can restrict wastewater flow and cause recurring blockages.
Offset or Separated Joints
Sewer pipe sections can shift over time, creating an offset at a joint. These openings can collect debris and allow roots or surrounding soil to enter the sewer.
Collapsed Sewer Line
A severely damaged or deteriorated sewer pipe can partially or completely collapse. In these situations, drain cleaning may provide only temporary relief, and replacement of the damaged section may be necessary.
Bellied or Sagging Pipe
A bellied sewer pipe has a section that has sunk below the intended grade. Wastewater and debris can collect in the low section, resulting in recurring blockages.
Deteriorated or Corroded Pipe
Older sewer pipes can deteriorate over time. Depending on the pipe material and extent of deterioration, repair or complete replacement may be recommended.
Recurring Sewer Blockages
If the main sewer line continues to become blocked after repeated drain cleaning, there may be an underlying structural problem with the pipe. A camera inspection can help determine whether roots, broken pipe, offset joints, buildup or another problem is responsible.
Do You Need Sewer Line Repair or Replacement?
Not every sewer problem requires complete replacement.
A localized defect may be repairable by replacing only the affected section. In other situations, extensive deterioration, multiple damaged sections or a collapsed sewer may make replacement a more appropriate long-term solution.
We inspect the available information and consider the condition of the existing pipe before recommending a repair method.
Signs You May Have a Sewer Line Problem
Contact a plumber for an assessment if you notice:
– Frequent main drain blockages
– Several fixtures draining slowly at the same time
– Sewage backing up into the home
– Unpleasant sewer odours
– Gurgling sounds from drains or toilets
– Repeated need for main drain cleaning
– Water or sewage appearing around a floor drain
– Problems that return shortly after drain cleaning
A single clogged fixture does not necessarily mean the sewer line needs repair. However, recurring or multiple drainage problems can indicate an issue with the main sewer line.
Our Sewer Line Repair Process
We follow a practical process to identify the problem before determining the appropriate repair.
1. Assess the symptoms
We discuss the drainage problem and inspect the accessible plumbing and drainage system.
2. Perform a sewer camera inspection when appropriate
A camera can help identify structural problems inside the sewer pipe.
3. Locate the damaged section
When excavation or a localized repair is required, locating equipment can help identify where the affected pipe is underground.
4. Determine the repair method
Depending on the condition of the pipe and site conditions, options may include localized repair, conventional excavation, pipe bursting or pipe relining.
5. Complete the repair or replacement
The damaged section is repaired or the sewer line is replaced using the selected method.
6. Test the sewer line
The drainage system is tested after the work to help confirm that wastewater is flowing properly.
Why Choose Mister Plumber?
– Licensed and insured plumbing contractor
– Over 20 years of plumbing experience
– Professional sewer camera and locating equipment
– Residential sewer repair and replacement
– Conventional and trenchless repair options
– Upfront pricing
– Free estimates
– Experienced Mississauga plumbing professionals
– Focused on finding the actual cause of the problem
We believe a sewer repair should address the underlying problem rather than simply provide a temporary solution.
Sewer Line Repair and Replacement in Mississauga
Whether you have a recurring sewer blockage, suspected root intrusion, a damaged pipe or a collapsed sewer line, professional inspection can help determine what is happening underground.
Mister Plumber provides sewer line inspection, repair and replacement services in Mississauga. We use professional equipment and proven repair methods to identify sewer problems and recommend an appropriate solution.
Call 416-939-1530 to schedule a sewer line assessment or request an estimate.
Frequently Asked Questions
How do I know if my sewer line needs repair?
Recurring main drain blockages, multiple slow drains, sewage backups, sewer odours and problems that return after drain cleaning can indicate a sewer line problem. A camera inspection can help determine the cause.
Can a sewer line be repaired without digging?
Sometimes. Trenchless methods such as pipe bursting or pipe relining can reduce excavation, but they are not suitable for every situation. The condition, size, location and configuration of the existing pipe must be assessed first.
Is pipe bursting better than traditional sewer replacement?
Neither method is universally better. Pipe bursting can be advantageous when the existing sewer is suitable for trenchless replacement and minimizing excavation is important. Conventional excavation may be more practical for certain localized repairs or site conditions.
Can tree roots be removed without replacing the sewer pipe?
Roots can sometimes be removed through professional drain cleaning, but if they are entering through cracks or separated joints, the underlying pipe defect may remain. Repair or replacement may be necessary for a long-term solution.
How long does a sewer line repair take?
The time required depends on the location and extent of the damage, the repair method, site conditions and whether excavation is necessary. After inspecting the sewer, the plumber can provide a more accurate estimate of the required work.
Do you provide sewer camera inspections?
Yes. Sewer camera inspection can be used to identify structural problems, root intrusion, blockages and other defects inside an accessible sewer line.
Do you repair only part of a sewer line?
Yes. If the problem is localized and the remainder of the sewer line is in suitable condition, replacing only the damaged section may be an appropriate solution.
Can a collapsed sewer pipe be repaired?
A collapsed section generally requires replacement or another appropriate structural repair. The best method depends on the extent of the collapse, pipe condition and site conditions.
How much does sewer line repair cost in Mississauga?
The cost varies depending on the type and location of the problem, pipe size and material, excavation requirements and selected repair method. A camera inspection and site assessment can help determine the scope of work and provide a more accurate estimate.
